Detailed Product Description

1. Feature and Function:

1) Since infrared control automatic faucet has limitative water discharge time, water will stop immediately when people draw hands back, Sometimes it is not convenient for people to use, Since they can not draw hands back if they want to keep on using water without stop. Touch button on faucet body enables people to open and close water manually. People can touch it to open water if they want to use water without stop and touch it again to close water.

2)Touch button can also be used to adjust inductive distance.

3)Adopt advanced micro-computer control technology, Can adjust inductive distance automatically.

4) Adopt advanced infrared encoding technology, Can reduce the degree of disturbance into the lowest and avoid water discharge by error effectively.

5) Use cam gear valve instead of solenoid valve, Cam Gear Valve is operated by motor not by electromagnetism, It can avoid many limitation of pulse style solenoid valve. We do not need to assemble each piece in production. It can be put into mass production as long as all parts meet the quality standard. Furthermore, It works more stably and safely.

2. Technical Specification:

Power Input
 6V (4 x 1.5V alkaline battery is recommended)
 
Inductive Opening Time
 1 second
 
Inductive Closing Time
 2 second
 
Limitative Water Discharge Time
 70 seconds
 
Detection Zone
 15~40 cm around faucet body
 
Water Pressure
 0.05 MPa ~0.6MPa
 
Power Consumption
 Static: 40 uA, active: 500 mA
 
Low-voltage Indication
 3.9V , Red light flash 2 times every 2 seconds
 

3. automatic adjust inductive distance of touch button:

When touch time is not more than 5 seconds, It can be used to open or close water.

When touch time is more than 5 seconds, It will enter preparation phase of adjusting inductive distance, Red light flash once every 1 second. It will recovery if you keep on touching it for more than 15 seconds. If you draw your finger back after it enter preparation phase of adjusting inductive distance, then touch it for 2 times within 5~15 seconds, It will enter phase of adjusting inductive distance 15 seconds later. Put obstruction on the needed place

sensor mixer(sensor faucet,sensor faucet )